New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Windows & Doors in Dallas, TX | Westlight Windows Dallas
We’re Westlight Windows Dallas, an independent Mr-Glass service provider serving homeowners across Dallas, TX. We repair and replace Mr-Glass windows and doors in Dallas’s brick veneer tract homes every week, and the single thing that sets our work apart here is knowing exactly how North Texas heat, hail, and hard water attack these specific frames. Owen Satterfield and our crew have spent years pulling corroded aluminum Mr-Glass frames out of 1970s ranches from Oak Cliff to Lake Highlands. If your Mr-Glass windows are fogging, sticking, or leaking, call (361) 441-0865 for a free estimate.
Why Dallas Residents Choose Us for Mr-Glass Service
Most window companies in Dallas will service any brand that comes through the door. We take a different approach. Our technicians have performed thousands of Mr-Glass window and door repairs and replacements across Dallas’s brick-veneer tract homes, so we know the specific seal, frame, and hardware failures these products develop under North Texas heat and hail. That familiarity means we diagnose faster, order the right parts the first time, and don’t waste your afternoon guessing.
Owen Satterfield, our owner, learned the windows and doors trade at Los Angeles Trade-Technical College before relocating to Texas, and he’s been in this trade for over two decades. He’s known for measuring twice, ordering once, and never upselling a homeowner on glass packages they don’t actually need. That’s the standard our whole crew works to. We’re also a full Mr-Glass sales & service resource for Dallas homeowners, and we keep commonly needed Mr-Glass hardware and weatherstripping stocked locally so we can turn most repairs around fast.
Common Mr-Glass Windows & Doors Problems We Solve in Dallas
Dallas puts Mr-Glass windows through a particular kind of punishment. Here’s what we see most often:
- Fogged insulated glass units from seal failure. Intense UV exposure and the thermal cycling between 100°F afternoons and cooler nights cause Mr-Glass seals to break down, letting moisture in between the panes. We replace the insulated glass units and restore the clarity, and we can upgrade the glazing while we’re in there.
- Corroded aluminum weep holes on Mr-Glass frames. In neighborhoods like Lake Highlands and Richardson, decades of sprinkler spray loaded with Dallas’s hard, mineral-rich water corrodes the weep holes on original aluminum frames. Water that should drain out gets trapped inside instead, leading to frame rot. This is a full frame replacement situation, not a pocket insert job.
- Warped vinyl sashes on Mr-Glass 190 Series Single Hung windows. We see this on homes where the window sits close to an unventilated attic that bakes in the summer. The prolonged 100°F+ heat softens and warps the vinyl, making the sash bind or refuse to seal. We replace the sash or the full unit depending on the extent of the warp.
- Broken single-pane glass on Mr-Glass 3900 Double Hung windows. Dallas spring hailstorms are hard on glass, and the single-pane Mr-Glass 3900 units in older homes are especially vulnerable. We replace the panes and can discuss impact-rated options if you’re tired of boarding up every spring.
- Hard-to-turn casement cranks on Mr-Glass 6700 Casement windows. The summer heat causes metal hardware to expand and bind, and years of grit and hard water scale make it worse. We clean, lubricate, or replace the crank mechanism as needed.
Mr-Glass Service in Dallas: What Local Conditions Mean for Your Equipment
Here’s something a generic Mr-Glass service page won’t tell you. Dallas’s 1970s-era brick veneer homes often have original Mr-Glass aluminum windows with weep hole corrosion from decades of hard, mineral-rich sprinkler water. This problem is rarely seen in the newer subdivisions to the north, where builders switched to vinyl frames and irrigation systems changed. If you own one of those older Dallas homes, the weep holes at the bottom of your Mr-Glass frames are the first place we look. When they’re corroded shut, water pools inside the frame channel, rots the wood behind the aluminum, and eventually shows up as staining on your drywall. By the time you see the interior stain, the frame usually needs full Window Replacement - Dallas. Our crew replaced three Mr-Glass 4500 Horizontal Rollers in a Lake Highlands ranch after hail shattered the glass and the homeowner noticed water staining inside. We removed the corroded aluminum frames, installed full-frame vinyl replacements with low-E glass, and re-caulked the brick openings, stopping the leak and cutting the July cooling bills. That’s the kind of Dallas-specific repair knowledge you don’t get from a call center.
Mr-Glass Models & Products We Service in Dallas
We service the full line of Mr-Glass windows and doors, including the 190 Series Single Hung, 3900 Double Hung, 4500 Horizontal Roller, and 6700 Casement. For warranty-aligned repairs, we use OEM Mr-Glass parts whenever they’re available. For out-of-production Mr-Glass lines, we source high-quality aftermarket balances, weatherstripping, and insulated glass units that match the original specs. Our Dallas shop keeps a rolling stock of common Mr-Glass hardware and weatherstripping so we can often complete repairs without waiting on a regional distributor. When frames have corrosion or rot, we recommend full frame replacement over pocket inserts to restore structural integrity, and we carry eight manufacturer lines so you have real product choice if you want to move to something like PGT, CGI, or ECO Window Systems.
Mr-Glass Service Pricing in Dallas
Most Mr-Glass window repairs in Dallas run between $180 and $340 for a single pane or hardware fix, while a full-frame replacement with a mid-range vinyl window typically lands between $700 and $1,100 per opening installed. Impact-rated upgrades add cost, and we’ll give you a written price before any work starts so there’s no door-step revision. Your free estimate includes a full inspection of the frame, glass, and hardware, plus a line-item quote for parts and labor. Call (361) 441-0865 to schedule yours. Owen’s rule is simple: if he wouldn’t put it on his own house, he’s not putting it on yours.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Windows & Doors in Dallas
It depends on the frame condition, not just the glass. If the glass is cracked but the aluminum frame is sound with clear weep holes, we can replace the insulated glass unit and you’re done. If hail impact has bent the frame or the weep holes are already corroded from sprinkler hard water, full replacement is the smarter money. Call (361) 441-0865 and we’ll tell you which route applies to your house.
A single-pane Mr-Glass window is a heat sieve in July. Replacing it with a low-E double-pane unit, which is a thin coating that reflects heat back into the room in winter and out in summer, can drop your cooling load noticeably in a Dallas summer. We’ll walk you through glazing options and never push a package you don’t need. Call (361) 441-0865 for a free estimate.
For most Dallas homeowners, yes. The spring hail belt runs right through the metro, and impact-rated glass spares you the annual plywood routine. We provide Window Installation in Dallas for impact-rated PGT and CGI options and can pair them with Mr-Glass-compatible frames. Call (361) 441-0865 and we’ll price it for your specific window sizes.
It is. The 100°F heat expands the metal hardware inside the crank, and years of hard water scale and grit make it bind worse. We clean and lubricate the mechanism first, and if that doesn’t free it up, we replace the crank. It’s usually a same-visit fix. Call (361) 441-0865 to schedule.
We remove the full aluminum frame, not just the sash. Pocket inserts can’t fix corrosion that’s already eating the frame from the inside. We pull the old frame down to the rough opening, replace any rotted wood, install a full-frame vinyl unit, and re-caulk the brick opening for a clean seal. Call (361) 441-0865 for a written quote.
Service Areas Near Dallas
We serve homeowners across the Dallas metro, including Arlington, Irving, Coppell, Mesquite, and Grapevine. If you’re in one of those areas and need Mr-Glass window or door service, we’ll come to you. See our Dallas service area page for full coverage details. We also offer Mr-Glass service in Arlington and Mr-Glass service in Irving for neighbors just outside the city.
Book Your Mr-Glass Service in Dallas Today
Call (361) 441-0865 to schedule your free estimate. We answer the phone with a real person, 24/7, and we’ll get your Mr-Glass windows or doors squared away right.
Written by Owen Satterfield, Owner at Westlight Windows Dallas, serving Dallas since 2009.
Six Reasons Homeowners Choose Westlight Windows Dallas
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.