New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Trusted Door Installation for Dallas Homeowners
Door Installation in Dallas isn’t something you want to think about twice. A door that sticks, drafts, or won’t latch is a daily annoyance, and a front door that looks tired drags down the whole entryway. Westlight Windows Dallas has installed and replaced doors across the metro since 2009, as an independently owned and operated Kingswell location. We show up in the window we gave, put the price in writing before any work starts, and leave your entry cleaner than we found it. Every job carries the 365-Day Done Right Promise: if the work isn’t right, we come back and fix it at no charge. Call (361) 441-0865 and a real person answers, day or night.
Front Door Replacement
Front Door Replacement means removing your existing entry door, frame and all, and installing a new one that fits square, seals tight, and opens the way a good door should. Dallas homeowners call us when the current door has warped in the summer heat, lost its weatherstripping, or simply looks outdated against the brick. A standard fiberglass or steel front door replacement in Dallas typically runs $1,200 to $2,800 installed, depending on the slab, frame condition, and hardware. We usually complete a front door replacement in a single day, including hauling the old door away.
Material Choices That Hold Up Here
Dallas summers hit hard, and a west-facing entry takes direct afternoon sun from late May through September. We install steel and fiberglass doors with insulated cores and proper weather seals, which hold their shape better than solid wood in swings between 100-degree heat and air-conditioned interiors.
What the Kingswell Guarantee Covers
Before we remove a single screw, you get a written price for the door, the frame work, the hardware, and the labor. No revised invoice at the door. No “while we’re here” add-ons. The written guarantee rides along when we finish.
Door Replacement
Door Replacement covers any door in the house that has outlived its usefulness, whether it’s an interior door that won’t stay closed or an exterior door that’s letting conditioned air escape. You’ll know it’s time when the door needs a shoulder to latch, daylight shows around the edges, or the frame has shifted enough that the reveal is uneven. Door Installation in Mesquite and the broader Dallas area generally costs $800 to $2,600 per opening depending on the slab, size, and hardware grade. Westlight Windows Dallas walks you through every line item before work begins, so the number you agree to is the number you pay.
Interior vs. Exterior Considerations
Interior doors are about fit and finish; exterior doors are about energy and security. We treat them differently, because a hollow-core hallway door doesn’t need the same sealing and hardware as a door facing a March windstorm off the prairie.
Why We Replace the Whole Frame
When the frame has settled or rotted, hanging a new slab in the old frame just moves the problem six months down the road. Our installers check the rough opening, the sill, and the framing before recommending slab-only replacement versus a full frame pull.
Sliding Glass Door Replacement
Sliding Glass Door Replacement swaps your tired, hard-to-roll patio slider for a new unit that glides without a fight and seals against Dallas dust and summer heat. You need it when the track is bent, the rollers are shot, the glass has moisture fogging between the panes, or the door simply won’t lock. Sliding glass door replacement in Dallas typically runs $1,800 to $4,200 installed, varying by glass package and frame material. We carry energy-efficient options from ES Windows and ECO Window Systems, so you get a slider matched to the Texas climate, not a one-size-fits-all unit.
When a Slider Becomes a Safety Issue
A slider that drags, jumps the track, or won’t lock is a liability. Tempered glass panels are heavy, and a derailed panel can do real damage. If yours is binding or coming off the rollers, let a trained installer handle it rather than forcing it back into place.
Glass Packages for Texas Sun
We order sliders with low-e glass, which is a thin coating that reflects heat back outside in summer and keeps interior heat from escaping in winter. It’s one of the cheapest ways to make a south-facing room comfortable again, and it cuts glare without making the room dim.
Storm Door Installation
Storm Door Installation adds a second, lighter door outside your main entry to block wind, rain, and bugs while letting light and fresh air move through. Dallas homeowners want storm doors most in fall and spring, when the weather teases but pollen and mosquitoes make an open front door a bad idea. Door Installation - Irving and across Dallas generally sees storm door installation costing $600 to $1,600 including the door, closer, hardware, and labor. Westlight Windows Dallas installs storm doors with interchangeable glass and screen panels, so you can swap them with the season without tools.
Ventilation Without the Bugs
A full-view storm door with a retractable screen gives you a cross breeze in April without inviting every mosquito in the neighborhood. The closer we install is adjustable for wind and temperature, so the door doesn’t slam in a gust or linger open when you’re carrying groceries.
Fit and Hardware Matter
Storm doors live on the outside edge of your entry, so they take the brunt of hail, wind, and direct sun. We set the frame square, mount the closer at the right height, and check the sweep so the door seals against the threshold even after it settles.
Sliding Glass Door Installation
Sliding Glass Door Installation adds a new, properly set patio or balcony door where you didn’t have one, or where a hinged door is eating floor space you’d rather use. We see it often in Dallas homes built in the 1970s and 1980s, where a cramped breakfast nook opens to the yard through a single swing door. Installing a sliding glass door in Dallas typically runs $2,000 to $5,500 depending on width, glass package, and whether the rough opening needs reframing. Westlight Windows Dallas pulls the permit when needed and sets the door plumb, level, and square so it rolls true for years.
New Opening vs. Existing Opening
Putting a slider in an existing framed opening is straightforward. Creating a new opening means header work, structural considerations, and careful flashing. We talk through both options and give you a written price for whichever path the opening requires.
Rolling Gear You Can Live With
We spec sliders with stainless steel rollers and adjustable track systems from ES Windows and Mr-Glass lines. Cheap rollers die in three years of Dallas dust and humidity. Good ones keep rolling with an occasional vacuum and a dry silicone wipe.
Door Repair
Door Repair fixes what’s broken on a door that’s otherwise worth keeping: sagging hinges, failed locksets, cracked door slabs, stripped screw holes, or weatherstripping that has given up. It’s the right call when the door itself is fine but something attached to it isn’t. Door repair in Dallas costs $175 to $700 on average, with most common fixes falling under $400. Westlight Windows Dallas diagnoses the root cause, not just the symptom, and tells you honestly if a repair will last or if replacement is the smarter money.
Common Failures We Fix Often
Loose hinge screws that strip the frame, misaligned strike plates, swollen edges that bind in humid months, and door sweeps that let daylight in under the slab. Most of these are an afternoon fix with the right tools and a careful hand.
The Kingswell Way on Repairs
You get a written price before we start, and if the repair fails within the guarantee period, we come back and correct it at no charge. That second visit is automatic and free, included in the original job. No negotiating, no phone tag.
Exterior Door Installation
Exterior Door Installation covers any door that separates conditioned living space from the outdoors: front entries, back doors, side doors, and garage-to-house doors. The job is about more than the slab, it’s the flashing, the seals, the threshold, and the frame, all working together to keep Dallas weather where it belongs. Door Installation - Duncanville and the wider Dallas area runs $1,200 to $3,200 installed on average for exterior doors, depending on the opening size and the product you pick. Westlight Windows Dallas installs doors that close the way a bank vault closes, with a full perimeter seal you can feel when you shut it.
Flashing and Sealing Done Right
Most failed exterior doors in Dallas leak not through the door, but around it. We flash the rough opening with membrane tape before setting the frame, bed the threshold in sealant, and check the corners so a driving rain in April stays outside where it belongs.
Security Hardware When You Want It
We can install multipoint locks, reinforced strike plates with full-length screws in the frame, and deadbolts that actually align with the strike. A strong door with weak hardware still gives way, so we address both.
French Door Installation
French Door Installation replaces or adds a pair of hinged doors that open from the center, usually between a living space and a patio, deck, or sunroom. It’s a good fit for Dallas homes where you want the whole opening available for moving furniture or entertaining, not just a single swing door. French door installation in Dallas typically costs $2,200 to $5,000 installed, depending on width, glass package, and hardware. We hang the pair so the astragal lines up, the active leaf latches cleanly, and the inactive leaf stays put until you want it open.
Why Alignment Matters More on a Pair
Two doors share one opening, and if the frame isn’t dead square, the pair binds at the top or the meeting stile scrapes the sill. We spend extra time on shimming and leveling, because a French door that doesn’t close cleanly is a daily frustration you’ll notice every time you walk through.
Glass Options for Your Sun Exposure
South- and west-facing French doors take a beating from Texas sun. We order low-e insulated glass from the manufacturer, and for rooms with heavy glare we can spec tinted or high-SHGC packages that cut heat without blacking out the view.
Brands We Service
We install Therma-Tru entry doors because they hold their shape in Dallas heat better than any solid wood door we’ve seen, and their warranty support is straightforward. Their fiberglass slabs take paint well, resist dents, and have a polyurethane core that insulates better than steel.
For sliding and patio work, we carry ES Windows and ECO Window Systems, two lines that perform reliably in the Gulf climate zone. ES Windows sliders have stainless roller hardware and tight manufacturing tolerances; ECO Window Systems offers impact-rated options for homeowners who want hurricane protection without adding shutters. Whether you have a Therma-Tru door, an ES Windows slider, or another make entirely, we can assess it and walk you through your options.
Signs You Need a Pro Right Now
- Daylight shows around the closed door. If you can see light through the gaps, conditioned air is escaping and Dallas humidity is coming in. The energy penalty adds up monthly, and the seal failure only worsens.
- The door needs a shoulder to latch. A door that won’t close without body weight has a frame or hinge problem, not a door-slamming problem. Forcing it works until the hardware gives out or the jamb splits.
- You hear wind whistling through the weatherstripping. Failed seals aren’t cosmetic. They let dust, pollen, and moisture into the house, and they make your HVAC work harder during every Dallas summer.
- The slab drags across the floor or sticks at the top. This usually means the house has settled or the hinges have slipped. A door that binds at the top is also a sign the frame is out of square, which gets harder to correct the longer it goes.
- The door won’t lock or the deadbolt misses the strike. A door that doesn’t lock is a security problem, not an inconvenience. Misaligned hardware is often fixable in one visit, but the longer it persists, the more wear accumulates on the latch and strike plate.
Our Process, Step by Step
- 1
You call and talk to a person. Not a menu tree. A live human answers at (361) 441-0865, day or night, and schedules your free estimate at a time that fits your week.
- 2
We measure and quote in writing. Owen Satterfield or one of our senior installers visits your home, checks the opening, the frame, the sill, and the slab, and writes down exactly what the job needs and what it costs. The price we hand you is the price you pay.
- 3
We order the door matched to the job. We pull from eight manufacturer lines so the product fits the opening and the climate, not the other way around. Lead times are shared up front, and we call when the door is in.
- 4
We install and clean up. Background-checked, uniformed technicians show up in the window we gave, protect the work area, set the door square and level, and haul away the old one. The entry is left cleaner than we found it.
- 5
We hand you a written guarantee. Before we leave, you get the Kingswell Guarantee in writing: the price, the work, and the promise that if anything fails within the guarantee period, we come back and fix it at no charge.
How Much Does Door Installation Cost in Dallas?
Most door installation projects in Dallas land between $800 and $5,000, and the spread comes down to a few predictable factors. A simple interior door replacement runs $800 to $1,200. A front entry door with a new frame, weather seal, and hardware runs $1,200 to $2,800. A sliding glass door replacement starts around $1,800 and can reach $4,200 for wider openings with upgraded glass. French doors and new openings sit at the top of the range.
What moves the price: whether the frame can be reused or needs full replacement, the size of the rough opening, the material and glass package, hardware grade, and whether the job needs reframing or permit work. The cheapest bid usually skips flashing, seal replacement, or hardware upgrade, and you pay for that within two seasons. The smart way to compare quotes is to ask for line items. Our written estimate lists every component, so you see exactly where the money goes before you commit.
Our Service Area Near Dallas
Westlight Windows Dallas serves homeowners across the metro. We install doors regularly in Arlington, Irving, Coppell, Mesquite, Grapevine, and Addison, and we work down through Duncanville, Lancaster, Red Oak, and Hutchins. Highland Park homes get the same written price and the same Kingswell Guarantee as every other job. If you’re in a surrounding city, chances are good we’re already working in your neighborhood. Check our Door Installation in Arlington and Door Installation in Irving pages for city-specific details.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Door Installation in Dallas
Door installation is the process of removing an old door and frame (or preparing a new rough opening), properly sealing and flashing the opening, setting the new door plumb and square, and finishing the hardware and trim. It includes weather sealing, threshold setting, and cleanup. Westlight Windows Dallas has done this work across the Dallas metro since 2009.
Most single-door replacements in Dallas finish in one day, from removal to final hardware. Full frame replacements and new openings can take two days, and custom-ordered doors add lead time before installation day. We give you the schedule in writing before work starts, and we hold to it. Call (361) 441-0865 to ask about your specific opening.
A typical door installation in Dallas runs $800 to $5,000 depending on the door type, whether the frame is replaced, and the hardware you choose. Front doors run $1,200 to $2,800, sliders $1,800 to $4,200, and storm doors $600 to $1,600. You get a written, line-item price before any work begins, with no door-step revisions.
Yes. We install Therma-Tru entry doors and have worked with their fiberglass and steel lines for years. We also carry ES Windows and ECO Window Systems for sliding and patio doors, plus five other manufacturer lines so the product matches your Dallas home’s climate and opening. If you have a specific brand in mind, ask us when you call.
Phone lines at (361) 441-0865 are answered by a live person 24 hours a day, 7 days a week. If a door has failed and left your home unsecured, a real person can talk through the situation and get a technician scheduled. No chatbot, no voicemail box.
Every door installation from Westlight Windows Dallas carries the 365-Day Done Right Promise: if the work isn’t right within the guarantee period, we return and correct it at no charge. You also receive a written Kingswell Guarantee covering the price, the arrival window, the clean job site, and the completed work. If a repair fails, the second visit is free, automatically.
Clear the area around the door, inside and out, so our installers have room to work. Move furniture or decor near the entry, and secure pets in another room. We protect the work area with drop cloths and clean up after, but a clear three to four feet around the opening speeds things up. That’s it. We handle the rest.
Schedule Your Door Installation Service in Dallas Today
Call (361) 441-0865 for a free, no-obligation estimate on your door installation in Dallas. You’ll get a written price before any work starts, a real arrival window, and a guarantee in writing when the job is done. A live person answers, day or night.
Written by Owen Satterfield, Owner at Westlight Windows Dallas, serving the Dallas metro since 2009.
Six Reasons Homeowners Choose Westlight Windows Dallas
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.