New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Windows & Doors in Irving, TX | Westlight Windows Dallas
We provide Mr Glass sales & service across Irving, from Valley Ranch to Las Colinas. What makes our work here different is simple: we’ve spent over a decade repairing and replacing the specific Mr-Glass aluminum window lines installed in Irving’s 1970s-1990s housing stock, so we know exactly which failures show up on which streets. Call (361) 441-0865 for a free estimate on repair or replacement, and we’ll give you a written price before any work starts.
Why Irving Residents Choose Us for Mr-Glass Service
Irving is full of houses built between 1970 and 2000, and a lot of them still have their original Mr-Glass aluminum windows and sliding patio doors. Those frames have been baking in Texas sun for 30 to 50 years, and they fail in predictable ways. We know those failure patterns because we’ve worked on hundreds of them. Owen Satterfield, our owner, learned the windows and doors trade at Los Angeles Trade-Technical College and has been at this for over two decades. His rule is simple: “If I wouldn’t put it on my own house, I’m not putting it on yours.” That’s why we use OEM-matched parts when they’re available, give honest repair-vs-replace advice, and never upsell a glass package you don’t need. For Mr-Glass sales & service across Irving, we’re the crew that answers the phone with a real person, every time.
Common Mr-Glass Windows & Doors Problems We Solve in Irving
Most of the Mr-Glass issues we see in Irving trace back to three things: intense sun, humidity, and hail. Here are the five we handle most often:
- Fogged glass and blown seals on Mr-Glass 3000 Series single-hung windows. These were the builder-grade standard in 1980s Irving homes. The single-pane aluminum frames lose their thermal seal after decades of intense summer sun, and you end up with condensation between the panes that won’t wipe off. It’s not just cosmetic – the window stops insulating properly.
- Warped Mr-Glass sliding patio doors on west-facing walls. In Valley Ranch, original aluminum patio doors on west exposures take direct afternoon heat for years. The frames warp, the sash won’t sit flush, and air leaks around the edges. The rollers start sticking, and eventually the door fights you every time you open it.
- Swollen and sticking Mr-Glass entry doors. Irving’s humidity gets into hollow-core doors on 1970s slab-foundation homes and makes them swell. Doors that won’t latch aren’t just annoying – they’re a security problem and a sign the door has reached the end of its life.
- Grit-filled Mr-Glass 2000 Series patio door tracks. After a big Irving thunderstorm, hail debris and grit wash into the bottom tracks. The rollers jam, the track wears out, and the door grinds instead of glides. We fix this with new rollers and a track rebuild, not just a spray of lubricant.
- Hard-to-open Mr-Glass 4000 Series double-hung windows. The balances wear out, especially on windows that face south or west. The window either won’t stay up or takes both hands to move. We replace the balances with OEM-matched parts and get them moving like new.
Mr-Glass Service in Irving: What Local Conditions Mean for Your Equipment
Here’s something you won’t read on a generic Mr-Glass page: Irving’s Valley Ranch master-planned community, built largely in the 1980s, has a high concentration of original Mr-Glass aluminum windows that are now failing nearly simultaneously. Same age, same sun exposure, same builder. We often schedule multiple homes on the same block in Valley Ranch for Window Installation in Irving in a single day, which reduces crew travel and lets us pass bulk-pricing on materials back to the homeowners. If you live on a street where the neighbor two doors down just had their windows replaced, yours are probably not far behind. The 1986 two-story on Saddlehorn Trail is a good example – our crew was called out for fogged Mr-Glass 3000 Series aluminum sliders that were hard to open. The seals had blown from decades of western sun, and the tracks were pitted from hail. We replaced all five windows with impact-rated vinyl horizontal rollers, reusing the existing interior trim so the house kept its original look. The owner told us the west-facing living room stayed 8 degrees cooler that afternoon. That’s what the right retrofit does in Irving.
Mr-Glass Models & Products We Service in Irving
We service the Mr-Glass lines that are most common in Irving homes: the 3000 Series Single-Hung, the 2000 Series Sliding Patio Door, the 4000 Series Double-Hung, and the 1500 Series Fixed/Picture Window. For repair jobs, we use OEM-matched parts when available – rollers, balances, and weatherstripping specifically – to keep the original fit and function. When the frame is corroded or the glass unit is over 15 years old, we’ll tell you straight: Window Replacement - Irving with impact-rated vinyl or fiberglass often makes more sense than patching, because the cost difference is minimal and the energy savings in Irving’s climate are substantial. We also install brand-new Mr-Glass impact-resistant windows and replacement doors when you’re ready to upgrade.
Mr-Glass Service Pricing in Irving
Most single Mr-Glass window replacements in Irving run $450 to $900 installed, depending on the model and whether we’re repairing the existing frame or doing a full-frame replacement. A sliding patio door replacement typically lands between $1,200 and $2,800. Repair work – like a roller or balance replacement – usually runs $150 to $400 per unit. What drives the cost is the condition of the frame, the glass package, and whether we’re matching existing trim. Our free estimate includes a written line-item price before any work begins, so you’ll know the number before you commit to anything. Call (361) 441-0865 for an exact quote – estimates are free.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Windows & Doors in Irving
Can you repair my original Mr-Glass aluminum windows in Irving without replacing the frames?
Yes, in many cases we can. If the frame is still square and not badly corroded, we can replace the glass unit, balances, rollers, and weatherstripping while keeping your original frame. Once the frame is warped or the aluminum is pitted through, replacement becomes the better call. Call (361) 441-0865 and we’ll give you an honest assessment.
Do Mr-Glass patio doors in Valley Ranch really warp from the sun?
Yes, they do. West-facing aluminum patio doors in Valley Ranch take direct afternoon heat for years, and the metal expands and contracts until the sash no longer sits flush. We see it regularly. The fix is usually a reinforced fiberglass or vinyl replacement door that won’t warp the same way.
Are Mr-Glass hurricane impact windows worth the cost in Irving?
For most Irving homeowners, yes. Irving gets severe thunderstorms with hail and high winds, and impact-rated glass protects against both storm damage and forced entry. The energy savings from replacing old single-pane aluminum with impact-rated insulated glass also add up quickly in our climate. It’s a bigger upfront investment, but it pays back in comfort and protection.
My Mr-Glass single-hung windows are foggy between the panes. Can you fix just the glass?
Yes. If the frame is in good shape, we can replace just the insulated glass unit (IGU) and restore the window to original performance. It’s a common job in Irving because seal failure from the sun is so widespread. We’ll tell you if the frame is too far gone to make glass-only repair worthwhile. Call (361) 441-0865 for a free estimate.
How long does a Mr-Glass window replacement take in a typical Irving 1980s home?
Most full-home window replacements in Irving’s 1980s brick-veneer homes take 1 to 2 days for the installation crew, depending on the number of windows and whether we’re doing full-frame replacements or insert retrofits. We’ll give you a committed arrival window before we start, and we leave the site cleaner than we found it. That’s part of the Kingswell Guarantee on every job.
Service Areas Near Irving
We serve Irving and the surrounding communities, including Coppell, Grapevine, Mesquite, and parts of Dallas and Arlington. If you’re near Valley Ranch or Las Colinas, you’re in our regular service area. For Mr-Glass service in Dallas, and for Mr-Glass service in Arlington, we’ve got crews familiar with the same 1980s aluminum window stock that defines Irving’s neighborhoods. Check our Irving service area page for full coverage details.
Book Your Mr-Glass Service in Irving Today
If your Mr-Glass windows or doors are fogged, sticking, warped, or just old, call (361) 441-0865 for a free estimate. We’ll give you a written price before any work starts, show up in the window we gave you, and stand behind the work with the Kingswell Guarantee. Owen and the crew are ready to take a look at your Irving home.
Written by Owen Satterfield, Owner at Westlight Windows Dallas Mr Glass service, serving Irving since 2009.
Six Reasons Homeowners Choose Westlight Windows Dallas
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.