New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Windows & Doors in Arlington, TX | Westlight Windows Dallas
We provide independent Mr-Glass service across Arlington, handling everything from fogged 4900 Series sashes to full-frame replacements on 1960s ranches. What makes our Mr-Glass work different here is the code reality: Arlington’s post-2010 impact-glazing mandate means we routinely upgrade older Mr-Glass units to laminated glass, something installers in Dallas or Fort Worth rarely deal with. If you need Mr-Glass windows or doors serviced, replaced, or brought up to code, call (361) 441-0865 for a free estimate.
Why Arlington Residents Choose Us for Mr-Glass Service
We’ve spent over a decade replacing and retrofitting Mr-Glass windows across Arlington’s mix of 1950s ranch homes and 1980s production builds. That matters because we know exactly where their frames fail and which replacement parts actually hold up in hail country. We stock genuine Mr-Glass replacement components, not generic vinyl glazing beads or aftermarket locks that cause sagging and air leaks within a season. Owen Satterfield, our owner, learned the windows and doors trade at Los Angeles Trade-Technical College and has spent more than twenty years in this business. He still measures twice and orders once. When you see our truck in Woodland West or Dalworthington Gardens, it’s Owen’s crew showing up in the window we gave, with the parts for the job already on board. We’re part of the Kingswell network, independently owned and operated. That means every Mr-Glass service call starts with a written price before any work begins. No revised invoices at the door. If the repair fails within the guarantee period, we come back and fix it at no charge. For more about what we do with this brand, see our Mr-Glass sales & service page.
Common Mr-Glass Windows & Doors Problems We Solve in Arlington
Mr-Glass windows are decent mid-range units, but Arlington, TX heat and storms expose their weak points. Here are the five failure patterns we see most often:
- Fogged glass on Mr-Glass 4900 Series single-hungs. After ten to fifteen years of Arlington’s hot, humid summers, the insulated glass seal breaks down and moisture gets trapped between the panes. It’s not a cleaning problem. It’s a seal failure, and the fix is replacing the glass unit.
- Cracked corner welds on Mr-Glass 3000 Series horizontal rollers. Repeated thunderstorm gusts flex the frame, and the weld at the corner eventually gives way. You’ll see a hairline crack and feel a draft. Sometimes we can weld it; more often the sash needs replacement.
- Warped sashes on west-facing Mr-Glass single-hungs. Direct afternoon sun on Arlington’s brick-veneer walls bakes the vinyl. The sash loses its shape, sticks in the track, and stops sealing. Full-frame replacement is usually the honest answer here.
- Broken spring balances. Years of dust, pollen, and debris accumulate inside the balance channels on Mr-Glass 4900 Series windows. The sash gets hard to lift or slams shut. We replace the balances with factory units, not universal parts.
- Hollow-core door sag and seal failure. Arlington’s 1950s-to-1990s housing stock still has plenty of original hollow-core doors. The hinges loosen, the door sags, and the weatherstripping tears. We rebuild or replace the door and frame, then re-bed the threshold.
Mr-Glass Service in Arlington: What Local Conditions Mean for Your Equipment
Here’s the Arlington-specific reality most window companies won’t tell you: the city’s post-2010 building code requires impact-resistant glazing on many replacement windows in single-family zones. That means when a Mr-Glass window on your home fails and you replace it, the new unit often has to carry laminated glass to pass inspection. Dallas and Fort Worth don’t enforce this as broadly. So a straightforward seal repair in Irving can become a Window Replacement - Arlington code-mandated glazing upgrade. We handle that every week. On a 1960s ranch in Woodland West, we found three Mr-Glass 2200 Series aluminum single-hungs with blown seals and hairline cracks at the corners. Our tech pulled the sashes, ordered factory-sealed Mr-Glass replacement glass, and re-bedded them with new weatherstripping. No more fog, no more draft, and they pass the current wind load requirement. That’s the difference between knowing Mr-Glass and knowing Arlington.
Mr-Glass Models & Products We Service in Arlington
We service the Mr-Glass 4900 Series vinyl single-hung, the 3000 Series vinyl horizontal roller, and the 2200 Series aluminum single-hung. We also handle Mr-Glass sliding doors that share components with the 3000 Series. For parts, we use only genuine Mr-Glass replacement components. Tolerances are tight on these units, and generic glazing beads or aftermarket locks cause sagging, air leaks, and warranty headaches. For most Arlington Mr-Glass windows over fifteen years old, we recommend Window Installation - Arlington full-frame replacement rather than a seal repair. The vinyl frame itself has usually become brittle from UV exposure, and putting new glass into a tired frame is money spent twice. We stock common replacement sashes, balances, and weatherstripping locally, which keeps most service calls to a single visit. If a part isn’t on hand, we order factory-sealed Mr-Glass components and schedule the return before we leave.
Mr-Glass Service Pricing in Arlington
Here’s what you can expect, straight from our pricing sheets:
- Seal repair or glass unit replacement (single Mr-Glass sash): $180 – $340 installed, depending on size and glass type.
- Balance replacement (per window): $90 – $160, including parts and labor.
- Corner weld repair on a 3000 Series roller: $140 – $260 if the sash is salvageable.
- Full-frame Mr-Glass window replacement (impact-rated): $650 – $1,150 per window, depending on size, frame condition, and whether Arlington’s impact glazing mandate applies.
- Sliding door glass or roller replacement: $280 – $520.
What drives the cost is the age of the frame, whether the unit needs laminated glass to meet Arlington code, and the condition of the rough opening. Every estimate is written and itemized before work starts. No change orders at the door. Call (361) 441-0865 and Owen’s crew will walk the job, measure, and hand you a number you can hold us to.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Windows & Doors in Arlington
Yes. We routinely upgrade Mr-Glass 4900 Series sashes to laminated glass to meet Arlington’s post-2010 impact glazing mandate for replacement windows in single-family zones. Laminated glass is two panes bonded with an interlayer, so it resists impact without shattering. If your frames are sound, we can often swap the glass alone. If the vinyl is brittle, a full-frame replacement with an impact-rated Mr-Glass unit is the better path. Call (361) 441-0865 for a free assessment.
It depends on how far the crack has run. If it’s a hairline fracture at the weld and the frame is otherwise straight, we can often re-weld and reinforce the corner. If the crack extends into the track or the sash has warped, the honest fix is replacing the sash or the entire window. We’ll tell you which it is before you spend a dollar. Call (361) 441-0865 and we’ll take a look.
Aluminum frames conduct heat and cold readily. In Arlington’s humid summers, warm moist air hits the cool aluminum surface and condenses. It’s more a physics problem than a product defect. The long-term fix is replacing the 2200 Series with a vinyl or thermally broken unit. Short-term, improved ventilation and moisture control help. If the sweating is accompanied by fog between the panes, that’s a seal failure. Call (361) 441-0865 and we’ll diagnose which issue you have.
Yes. Bronze-tinted glass is still available through Mr-Glass’s replacement glass program, and we match the tint on 1980s Arlington production homes regularly. Bring us a photo or a small sample and we’ll confirm the exact tint before ordering. We’ll also tell you if the glass still meets Arlington’s current code requirements. If it doesn’t, we’ll show you the compliant alternative before any work begins.
Fifteen to twenty years for the glass seal, and about the same for the vinyl frame if it’s not heavily sun-exposed. West-facing windows in Arlington typically degrade faster due to direct afternoon heat on brick walls. Spring balances may need replacement around the ten-year mark. If your Mr-Glass windows are older than fifteen years and showing multiple failure signs, full replacement is usually cheaper than repairing them piece by piece. Call (361) 441-0865 for an exact quote.
Service Areas Near Arlington
We serve Arlington and the surrounding cities, including Dallas, Irving, Coppell, Mesquite, and Grapevine. We also cross into East Fort Worth when the job calls for impact glass. For homeowners to the west, see our Mr-Glass service in Irving page. For those east of town, Mr-Glass service in Dallas covers the corridor.
Book Your Mr-Glass Service in Arlington Today
If you have Mr-Glass windows or doors that need service, replacement, or an Arlington code-compliance upgrade, we’re ready. Call (361) 441-0865 to schedule your free estimate. We’ll give you a written price, a real arrival window, and the guarantee in writing before we leave the driveway. If it’s not done right, we come back and make it right. That’s the Kingswell Way.
Written by Owen Satterfield, Owner at Westlight Windows Dallas, serving Arlington since 2009.
Six Reasons Homeowners Choose Westlight Windows Dallas
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.