New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CWS Door Installation: The Dallas Owner’s Guide
If you have a CWS door that needs installation work in Dallas, most complete door installation jobs run between $450 and $1,800 depending on whether we’re swapping hardware, replacing a slab, or doing a full frame-and-threshold rebuild. We stock CWS-compatible parts on our trucks and can usually get your door operating correctly on the first visit. Most Dallas homeowners discover the problem the same way: a door that suddenly scrapes the threshold, a latch that no longer catches, or a hinge that groans like it’s been awake since the last ice storm.
Which CWS Models This Applies To
CWS manufactures entry doors and patio doors across several series lines, and the installation details vary by what you have. The most common CWS doors we work on in Dallas are their hinged entry door systems and sliding patio doors, though we also see their outswing configurations on older homes near White Rock Lake. If you can find the manufacturer label on the door edge or top rail, look for the series code stamped above the glass markings. That code tells us the exact hinge geometry and threshold design your door was built with, which matters because CWS changed their threshold profile on models produced after 2016. Mixing an old slab with a new threshold usually works with shimming, but it’s not a drop-in fit. For most Dallas homeowners, OEM CWS parts make more sense than aftermarket equivalents because the hinge mortises and strike plate locations are factory-routed to match. We stock both OEM and quality aftermarket hardware, and we’ll tell you which one actually fits your door before we order anything.
Signs Your CWS Door Installation Is Failing
- The door drags or scrapes the threshold. Dallas’s clay soil expands and contracts with seasonal moisture, and CWS frames anchored to a shifting slab will eventually throw the door out of square. If you have to lift the handle to lock it, the hinge screws or the frame itself has slipped.
- Light or daylight is visible around the weatherstripping. CWS door weatherstripping is compression-fit, and once it flattens out from repeated use or direct west-facing sun exposure, you’ll see a halo of light around the door edge. This means your AC is leaking into the driveway all summer.
- The latch or deadbolt no longer engages cleanly. A CWS lock that suddenly grinds or won’t throw is usually a strike plate alignment issue from a settling frame, not the lock itself. Continuing to force it will damage the lock body.
- Condensation or fogging between the glass panes. If your CWS door has an insulated glass unit and the desiccant inside the spacer has failed, you’ll see moisture that never wipes away. That glass unit needs replacing, not the whole door.
- The door feels heavier or harder to swing than it used to. This is often a hinge that’s pulling away from the frame, especially on CWS doors installed on the sun-baked west side of a Dallas house. Longer screws and fresh hinge reinforcement usually correct it if caught early.
Replacement Cost & What’s Included
For CWS door installation work in Dallas, here’s what you can expect on price. A hardware-and-hinge rebuild with new weatherstripping typically runs $450 to $700 installed. Replacing a CWS entry slab while keeping the existing frame runs $900 to $1,400, and a full frame-and-threshold replacement lands between $1,200 and $1,800 depending on door size and how much drywall repair the removal creates. Every price includes parts, labor, haul-away of the old components, and a written quote before any work starts. You’ll see the number on paper first, and that number doesn’t change at the door. We don’t revise quotes after the fact.
DIY or Call Us?
Some things you can check yourself safely: tighten visible hinge screws, inspect weatherstripping for flattening, and feel for drafts around the frame. If tightening those screws with a longer fastener solves the sag, great. But if your CWS door is dragging because the frame itself has shifted, or if the threshold is pulling away from the slab, this is where DIY goes sideways. Forcing a misaligned door back into place can crack the welds on CWS hinge plates or split the frame jamb, and now you’re paying for a full replacement instead of a shim-and-anchor repair. Our technicians in Dallas have done this work on hundreds of CWS doors, and Owen Satterfield has spent over two decades in the windows and doors trade, so he’s seen nearly every way a Texas door can fail. If I wouldn’t put it on my own house, I’m not putting it on yours. We’ll come out, measure it right, and tell you exactly what it needs. Call (361) 441-0865 and we’ll get you scheduled.
FAQs
Most CWS door hardware replacements and slab swaps in Dallas are completed in a single visit lasting three to five hours. Full frame-and-threshold replacements typically take six to eight hours, and if drywall repair is needed, we’ll schedule a follow-up once the mud dries. Call (361) 441-0865 for a specific time estimate on your door.
Yes, if the slab itself is sound and the problem is hinges, weatherstripping, strike alignment, or threshold anchoring, we can usually repair it without replacing anything major. If the slab is warped, the frame is rotted, or the glass unit is fogged, replacement is the better value. A free inspection is the fastest way to know which path applies to you.
Our trucks carry CWS-compatible hinges, weatherstripping, thresholds, strike plates, and common hardware on every Dallas job. For model-specific slabs or odd-size glass units, we order direct and typically have the part in hand within three to five business days. We’ll give you a written timeline before any order is placed.
A properly installed CWS door in Dallas should give you twenty-plus years of service, though west-facing doors without shade can need weatherstripping and finish touch-ups every five to seven years because of intense afternoon sun. Steel slabs with intact factory coating hold up well, but door glass units on the hottest exposures tend to fail at the ten to fifteen year mark. We also stock parts for PGT, CGI, and ES Windows doors if you’re replacing another brand down the road.
Written by Owen Satterfield, Owner, Westlight Windows Dallas at Westlight Windows Dallas, serving Dallas and nearby areas.
Six Reasons Homeowners Choose Westlight Windows Dallas
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.