VLX 80 Casement Window

VLX 80 Casement Window in Dallas, TX | Westlight Windows Dallas

The VLX 80 Casement Window is a side-hinged aluminum window with ultra-narrow sightlines and full-sash ventilation, built by ViewLux and installed across Dallas by Westlight Windows Dallas. Homeowners choose it for the clean profile: a 1.97-inch frame that disappears into the wall, leaving more glass and less metal in the way. Since we’re an authorized ViewLux installation partner, every VLX 80 we place in Dallas, TX is set, sealed, and warrantied by our own crew, not a subcontractor we’ve never met. If you’re pricing the VLX 80 for a new build in Lakewood or a remodel in Preston Hollow, call (361) 441-0865 for a free on-site measurement and a written quote.

Call (361) 441-0865

Product Overview – VLX 80 Casement Window

The VLX 80 exists for one reason: to put the largest possible pane of glass in front of you without making the frame the star of the show. The side-hinged design means the entire sash cranks outward, capturing Dallas’s south breeze along the full height of the opening. That’s the ventilation part. Fixed windows can’t do that. Single-hung windows can’t do that. A casement like the VLX 80 opens edge-to-edge, so on a mild October afternoon in Dallas, TX, you get airflow through the whole window, not just the bottom half.

Architecturally, the VLX 80 fits where sightlines matter most: modern builds in East Dallas and Lake Highlands with floor-to-ceiling glass, mid-century remodels in Casa Linda, and contemporary additions across North Dallas where homeowners want the window frame to read as a thin line, not a thick border. The aluminum construction is the reason this is possible. Aluminum holds its shape under load and heat far better than vinyl, which lets ViewLux engineer a 0.079-inch wall thickness that stays straight through 40 Dallas summers. That’s a wall thickness roughly the diameter of a nickel, holding a pane that may weigh 60 pounds or more.

We stock, finish, and install the VLX 80 as an authorized partner, which means the product arrives from ViewLux, but the measurement, the setting, the perimeter sealing, and the final adjustment are all done by Westlight Windows Dallas. One phone number, one warranty story. Call (361) 441-0865 if you want to see a VLX 80 in person before you commit.

Technical Specifications

Here’s the VLX 80 in plain numbers, the ones that matter when you’re comparing it against another casement line. These are manufacturer engineering values, not marketing adjectives.

• Frame profile width: 1.97 inches, measured across the visible frame face. That’s the number that determines how much glass you actually see.
• Wall thickness: 0.079 inches on the aluminum extrusion. This is the structural backbone of the frame; it’s why the sash stays square year after year.
• Glass options: Clear, Frosted, Low-E, Tempered, and Laminated. Each can be combined into insulated glass units depending on the application.
• Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, and Teak Wood. Powder-coat and anodized finishes are available per the color line.
• Screen options: Fixed Screen or Retractable Screen. The retractable rolls away when the window is closed, keeping the exterior sightline fully clean.
• Sill options: Standard Sill or Low-Profile Sill. The low-profile sill is popular in Dallas modern builds where the window sits close to the finished floor.

Every VLX 80 we install in Dallas is ordered to your exact opening dimensions. This is a made-to-measure window, not a stock size pulled off a shelf.

Performance Features

Thermal Efficiency. The VLX 80 uses a thermal break inside the aluminum frame, separating the interior and exterior metal so heat doesn’t pour through the frame in August. Pair that with Low-E glass and the window earns an NFRC-rated energy performance that holds up on a west-facing Dallas wall.

Acoustic Performance. Casements seal on all four sides, and the VLX 80’s gasket system closes the sash tight against the frame. For homes near Dallas Love Field, Central Expressway, or the DART rail on Mockingbird, laminated glass pushes the sound control further.

Airtightness & Weather Seal. The hinged sash compresses the weatherstripping when closed, and the multi-point locking hardware pulls the sash into the frame evenly. No gaps at the corners, no air seepage, no dust blowing in off the Katy Trail in March.

Waterproofing. The frame has an internal drainage channel that moves water out through the sill, not into the rough opening. Combined with AAMA 812 low-expansion foam sealant at every perimeter joint, the VLX 80 handles Dallas’s gully-washer storms without leaking.

Wind Resistance. ViewLux rates the VLX 80 for wind loads that meet North Texas storm requirements. For homeowners in exposed areas or second-story corners in Frisco and Plano, we specify stronger glazing and anchor patterns to match the site’s wind zone.

Security & Hardware. The casement crank and multi-point lock keep the sash secured at multiple points along the frame, not just one latch in the middle. Impact-resistant laminated glass is available as a glass option for street-facing or ground-floor installations across Dallas. We strongly recommend it for first-floor windows.

Color & Glass Options

Where your VLX 80 lands stylistically has a lot to do with the finish. Premium Black is the default on modern Dallas builds; it frames the glass with a defined edge and works with black storefronts, black steel accents, and dark roof lines common in East Dallas. Pure White suits traditional brick homes in Lakewood, Preston Hollow, and the M Streets. Anodized Silver has a metallic, industrial feel that reads as architectural rather than residential. Bronze is a standby on mid-century homes in Casa View and North Dallas. Champagne is a warm-gray metallic that works well with stone. Teak Wood is for the homeowner who wants the warmth of wood-grain without the maintenance of a real wood frame; it pairs well with ranch-style and transitional exteriors across Dallas, TX.

On the glass side: Clear is the baseline. Frosted is for bathrooms, utility areas, and any first-floor window where you want privacy without a curtain. Low-E is the energy glass; if you’re buying the VLX 80 in Dallas, TX, order Low-E. Tempered glass is safety-rated and required by code in certain locations like doors and low windows. Laminated glass gives you impact resistance and is the option we recommend on any Dallas ground-floor casement.

Installation by Westlight Windows Dallas in Dallas

A VLX 80 is only as good as the opening it’s set into. ViewLux builds an excellent window, and the warranty it carries is contingent on that window being installed correctly. We say that up front because Dallas is full of window installs that fail at the perimeter before the sash ever has a problem. A window that’s not level, not plumb, not square, and not sealed correctly will leak, bind, or both, and the manufacturer will not pay for that.

Our installation process in Dallas starts before the old window comes out. We inspect the rough opening, check for rot or settling, and confirm the measurement before we order the sash. On install day, we set every VLX 80 level, plumb, and square using shims and anchor screws, then foam the entire perimeter with AAMA 812 low-expansion sealant. That foam is required by AAMA 2400/2410, the installation standard for windows in North America, and we don’t skip it. Every joint gets it, every time. The result is an airtight, watertight seal from the rough opening outward, with no drafts and no water intrusion.

After the window is set, we apply the exterior flashing and cladding, run a final water test on the sill and corners, adjust the sash and hardware, and vacuum the work area. You should not know we were there except for the new window. For Dallas specifically, we account for our heat and sun: dark finishes on south- and west-facing walls need proper glass and glazing specs to avoid overheating the frame, and we factor that into every recommendation. If you’re replacing a window in Dallas, TX, have it installed by the same company that measured and ordered it. Call Westlight Windows Dallas at (361) 441-0865.

Frequently Asked Questions – VLX 80 Casement Window

What is the lead time for the VLX 80 Casement Window? The VLX 80 is made to order; lead time in Dallas is typically 3 to 5 weeks from final measurement to delivery at our warehouse, plus one day for installation. Custom finishes and laminated glass can add a week. Call (361) 441-0865 and we’ll give you a current production schedule before you commit.

Does the VLX 80 qualify for energy tax credits? The VLX 80 qualifies for federal energy tax credits when ordered with Low-E glass that meets the ENERGY STAR criteria for the South-Central zone, which includes Dallas. We confirm the glass package against the current IRS requirements when we quote your project so you know before you buy.

What warranty comes with the VLX 80 Casement Window? ViewLux provides a manufacturer warranty on the frame, finish, and glass, and Westlight Windows Dallas provides a separate installation workmanship warranty on the setting and sealing. Both are contingent on professional installation per AAMA standards, which is what we do. The specific warranty terms are included in writing with your quote.

Can I customize the size of the VLX 80 Casement Window? Yes. The VLX 80 is fabricated to your measured opening, so widths and heights are not limited to stock sizes. There are maximum and minimum sash dimensions based on wind load and glass weight, and we’ll confirm those against your wall. We measure every opening in Dallas ourselves; we never order from homeowner measurements.

How do I maintain aluminum frames in Dallas? Wash the frame and glass twice a year with mild soap and water, and rinse the sill’s weep holes so drainage stays clear. Check the weatherstripping every fall before winter, and if you have hard water from a Dallas irrigation system, wipe the glass dry to avoid mineral spots. Aluminum frames need no painting or sealing, ever.

For any other question about the VLX 80 Casement Window, call (361) 441-0865 and ask for a product specialist. We’ll answer over the phone, not with a chatbot.

Get a Quote – VLX 80 Casement Window in Dallas

If you’re considering the VLX 80 for your Dallas home, the next step is a measurement and a written quote. We’ll measure the opening, confirm the glass and finish options, and price the full install with all permits, sealant, flashing, and cleanup included. No change orders, no surprises. Call Westlight Windows Dallas at (361) 441-0865 to schedule your free on-site measurement and project estimate.

Written by the team at Westlight Windows Dallas, authorized ViewLux installation partner, serving Dallas, TX and surrounding communities.