New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Door Installation: The Dallas Owner’s Guide
Mr-Glass door installation in Dallas typically runs $685 to $1,450 for a complete replacement using OEM or equivalent Mr-Glass-compatible hardware, installed same-week in most cases. When a Mr-Glass door unit starts binding, dragging, or letting daylight through the weatherstripping, what you’re actually dealing with is usually a failure of the frame, roller, hinge, or seal – not the glass panel itself. Homeowners tend to discover the problem after a cold snap or a storm, when the door suddenly won’t latch, the panel sits uneven in the frame, or condensation starts creeping between the panes. The good news: Mr-Glass doors are built on standard residential door geometry, and we stock the replacement parts that match them, so you won’t wait weeks for a special order.
Which Mr-Glass Models This Applies To
Mr-Glass manufactures sliding patio door panels, hinged French-style door units, and fixed sidelight configurations in standard widths from 60 to 96 inches, with panel heights at 80 and 82 inches. The critical identification point is the sticker on the door’s top edge or hinge-side jamb – it carries a manufacturer code that tells us the series, glass package, and original hardware set. If the sticker’s gone (or painted over, which we see a lot on older Dallas homes), we match by measuring the panel width, the roller or hinge offset, and the glazing thickness.
For OEM parts, Mr-Glass uses a nylon-wheel roller assembly on their sliding units and adjustable stainless hinges on the swinging ones. Quality aftermarket equivalents exist and often carry better seals than the original, but there’s a compatibility gotcha: Mr-Glass sliding doors from the early 2010s use a 1-1/4-inch roller housing that later models swapped for 1-1/2-inch. That quarter inch is the difference between a door that glides and a door that binds. We measure before we order anything, because guessing at the counter is how you end up with a door that still drags after you paid for the fix.
Westlight Windows Dallas is an independent installer, not a Mr-Glass affiliate or authorized service center. That means we’re honest about when OEM makes sense and when a better aftermarket part will outlast what the factory shipped. For the record, we also stock parts for PGT, CGI, and CWS doors if you have other openings in the house that need attention.
Signs Your Mr-Glass Door Installation Is Failing
- The door sticks at the top or bottom, but only at certain times of day. This is frame movement. Dallas clay soil expands and contracts with moisture, and that movement telegraphs through the door frame. It’s not a bad panel – it’s the jamb pulling out of square, and the fix usually involves re-shimming the frame and resetting the rollers or hinges.
- You can see daylight between the panel edge and the frame. Worn weatherstripping or a sagging panel. On sliding units this is almost always a roller that’s worn flat or a track that’s bent from years of grit gathering in the channel. On hinged doors it’s hinge sag, which is repairable with new bearing hinges rather than a whole door.
- Condensation inside the glass unit. That’s a failed seal, and it never self-heals. The only fix is replacing the insulated glass unit (the IG), which we match by thickness and size. You do not need a new door for this – but you do need to address it before the moisture damages the frame.
- The lock no longer lines up with the striker plate. The door shifted. Could be a hinge or roller issue, could be frame movement. Either way, forcing the lock just wears out the lock mechanism, and then you’ve got two problems instead of one.
- The door makes a grinding sound when it moves. On sliding doors that’s a roller that’s seized and is now being dragged across the track, which chews up the metal. The sooner you stop using it, the less likely we have to replace the track, which is the more expensive repair.
Replacement Cost & What’s Included
| Mr-Glass Door Service | Typical Installed Price (Dallas) |
|---|---|
| Roller replacement (sliding door, per panel) | $185 – $340 |
| Hinge replacement (hinged door, complete set) | $220 – $395 |
| Weatherstripping & seal replacement | $160 – $295 |
| Insulated glass unit replacement | $420 – $895 |
| Full Mr-Glass door replacement (panel, frame, hardware) | $685 – $1,450 |
These are installed prices – parts, labor, and cleanup included, written out before any work starts. Your price depends on panel size, whether the door is a slider or hinged, and whether the track or jamb needs resetting. We hand you the written quote before a single screw comes out, and if the repair fails within a year, we come back at no charge. That’s the Kingswell Guarantee: the price is written, the window is committed, the site is clean, and the guarantee is on paper. Owen Satterfield has been doing this work for over two decades, and his rule holds: if he wouldn’t put it on his own house, it’s not going on yours.
DIY or Call Us?
There are two things you can safely check yourself, and one thing you should not touch. Safe: inspect the track for debris and wipe it clean; check whether the handle screws are loose. Not safe: removing a sliding door panel to look at the rollers. A full Mr-Glass sliding panel weighs between 80 and 140 pounds depending on size and glass package, and once it’s off the track it wants to fall. We’ve seen too many broken toes, crushed fingers, and cracked glass panels from well-intentioned DIY attempts. If the door is dragging, grinding, or the lock won’t catch, call us at (361) 441-0865 and let a background-checked technician with the right lifting gear do it. The estimate is free, and you’ll know the price before we touch anything.
FAQs
With proper installation, the door panel and frame should last 25 to 30 years in North Texas weather, but the moving parts – rollers, hinges, weatherstripping – typically need replacement every 7 to 12 years depending on sun exposure and how much grit gets in the track. Dallas UV is hard on seals, so expect weatherstripping to degrade faster on west-facing installations. Call (361) 441-0865 if your door is approaching that age and we’ll inspect it honestly.
Most Mr-Glass door failures are repairable – rollers, hinges, locks, and weatherstripping are all serviceable parts, and even a fogged glass unit can be swapped without replacing the door. Full replacement only makes sense if the frame is rotted, severely out of square from foundation movement, or if you want to upgrade the entire door to impact-rated glass. We’ll tell you which one you need, and we won’t push a replacement if a repair does the job.
Most roller, hinge, or seal replacements take 45 to 90 minutes on site. Replacing an insulated glass unit usually takes about two hours because we have to remove the panel, swap the IG, and re-set the door in the frame. A complete door swap is a half-day job. You’ll get a committed arrival window when you book, and we show up inside it – that’s part of the Kingswell Guarantee.
We stock the most common Mr-Glass roller, hinge, and weatherstripping parts on our trucks, so most repairs happen in a single visit. Custom-sized glass units take 5 to 10 business days to fabricate, and we’ll tell you that timeline up front before you pay for anything. Call (361) 441-0865 for a free estimate and we’ll let you know immediately what’s in stock for your specific door.
Written by Owen Satterfield, Owner, Westlight Windows Dallas at Westlight Windows Dallas, serving Dallas and nearby areas.
Six Reasons Homeowners Choose Westlight Windows Dallas
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.