CGI Door Installation Nationwide

CGI Door Installation: The Dallas Owner’s Guide

CGI door installation in Dallas typically runs $1,850 to $4,600 installed, depending on whether we’re swapping hardware on an existing impact-rated slab or setting a full CGI door unit into a rough opening. Most hardware-level jobs are done in a single visit, since we stock common CGI replacement parts on the trucks and can order series-specific pieces within three to five business days. You usually find out a CGI part has failed the hard way: the door starts dragging against the threshold, the lock won’t throw cleanly, or you notice daylight sneaking past the weatherstripping on a door that used to seal tight.

Call (361) 441-0865

CGI doors are built for hurricane country, and Dallas wind and heat put different stress on them than coastal salt air does. We’ve been installing and repairing them here long enough to know exactly where they wear first and what it costs to make them right. Owen Satterfield, our owner, learned this trade at Los Angeles Trade-Technical College before moving to Texas, and he’s spent years pulling CGI hardware apart in Dallas homes from Oak Cliff to the neighborhoods around White Rock Lake.

Which CGI Models This Applies To

CGI makes impact-rated entry doors and window systems, and most Dallas homeowners we see have either the Estate Collection or the Sentinel series. The Estate line runs a multi-point locking system that ties into the frame at three points, while Sentinel doors use a heavier continuous hinge and a different threshold profile. The quickest way to identify what you have is to look at the hinge side of the door slab: CGI stamps a model code and manufacturing date on a small label near the bottom hinge. If that label is painted over or missing, we measure the door thickness and the backset of the lock, which narrows it down fast.

One compatibility gotcha with CGI doors that surprises people: the hinge mortises are cut to a specific depth and offset that standard aftermarket hinges don’t match. The OEM hinge is your best bet for a clean fit. For less critical parts like sweep seals, astragals (the vertical seal where double doors meet), and roller assemblies, there are quality aftermarket equivalents that perform well. But for the multi-point lock gearbox and the strike plates, we insist on CGI-spec parts, because the geometry has to be exact or the door won’t lock securely. We’re an independent service provider, not affiliated with CGI, and we source both OEM and proven aftermarket parts depending on what will actually hold up.

Signs Your CGI Door Installation Is Failing

• The door drags or scrapes when you open it. This usually means the hinges have worn out of alignment or the door slab has settled slightly. On a CGI door, the extra weight of impact-rated glass makes hinge wear show up sooner than on a hollow-core door.
• The lock requires real force to throw the deadbolt. When the multi-point gearbox wears, the rods and rollers don’t align with the strike plates anymore. Forcing it only bends the rods and makes the next repair more expensive.
• Water or daylight shows through the threshold. The sweep seal on a CGI threshold breaks down after years of Dallas heat cycles. It’s a cheap part, but ignoring it lets water into the subfloor and invites rot.
• The door won’t stay latched or pops open on its own. This points to a strike plate that’s drifted or a warped edge on the slab. A door that won’t stay closed is a security problem, not a convenience one.
• You hear a grinding or clicking near the hinge line. That sound is metal wearing against metal, usually a failing roller or a binding hinge pin. It won’t fix itself.

Replacement Cost & What’s Included

For most CGI door hardware replacements in Dallas, you’re looking at:

• Hinge replacement (single door, all three hinges): $210 – $480 installed
• Multi-point lock gearbox and rods: $430 – $890 installed
• Threshold and sweep seal replacement: $180 – $360 installed
• Astragal replacement (double doors): $260 – $520 installed
• Full CGI door slab replacement with existing frame: $1,850 – $3,200 installed
• Complete CGI door unit including frame: $2,900 – $4,600 installed

The range comes down to which series you have, whether the frame is sound enough to keep, and whether surrounding trim needs to be pulled and re-set. Every quote is written before any work begins. You’ll see the part cost, the labor, and the total on paper, and that’s the price you pay. If the repair fails within our guarantee period, we come back and fix it at no charge. That’s the Kingswell Guarantee, and it applies to every CGI door job we do in Dallas.

DIY or Call Us?

Some things you can safely check yourself. Tightening hinge screws is fine. Cleaning the threshold track and replacing a cracked sweep seal are straightforward if you’re comfortable with a drill. What you shouldn’t touch is anything involving the multi-point lock gearbox or the hinge mortises. The springs and tensioned rods inside a CGI multi-point lock can release hard if they’re pried wrong, and the door slab is heavy enough to crush a finger or worse if it comes off its hinges unexpectedly. That’s work for someone who does it every week. If you’re in Dallas and you’ve got a CGI door that’s dragging, sticking, or refusing to lock, call us at (361) 441-0865. We’ll tell you over the phone what we think the job involves, and then we’ll show up in the window we gave you with a written price.

FAQs