New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Dallas pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Replacement Across Dallas
Window replacement in Dallas usually runs $650 – $2,400 per opening installed, depending on whether you need a pocket insert or full frame replacement, and most jobs take one to two days. We’re Westlight Windows Dallas, an independently owned and operated Kingswell location, and we’ve been replacing windows in Dallas since 2009. Owen Satterfield leads our crews, and we answer the phone 24/7 with a live person – not a voicemail box. Call (361) 441-0865 for a written price before any work starts, the same way we handle every job under the Kingswell Guarantee.
Why Westlight Windows Dallas Is Dallas’s Preferred Window Replacement Company
Dallas homeowners call us because we show up in the window we gave, leave the job site cleaner than we found it, and put every promise in writing before a single screw turns. That’s the Kingswell Way: say the price before the work, arrive when we said, leave the place cleaner, hand you a written guarantee, and come back at no charge if the repair fails within the guarantee period. The 365-Day Done Right Promise backs every installation in Dallas, so if something isn’t right, we make it right.
Our technicians are background-checked and uniformed, so when you open the door for a window replacement in Dallas, you know exactly who’s walking in. We carry eight manufacturer lines, including PGT impact-rated windows, ECO Window Systems energy-efficient glass, and Therma-Tru entry doors, which means you get the product matched to your Dallas home rather than a one-brand pitch forced onto your opening. When a hail claim requires documentation for your insurer, our Dallas-Fort Worth office coordinates directly with adjusters and handles the paperwork.
People in neighborhoods like Lake Highlands, Preston Hollow, and Casa View have dealt with contractors who ghosted after the deposit. We don’t do that. Owen Satterfield sets the standard for every job: a written price before any work starts, a real arrival window, and a free second visit if the repair fails – included automatically, no negotiating required.
Window Glass Repair in Dallas
Window glass repair in Dallas most often means replacing a failed insulated glass unit (IGU) in an existing frame – the hailstorms and intense UV that hit this region every year are hard on seals. When the seal between the two panes fails, condensation fogs the glass from the inside and you can’t wipe it off. Most residential IGU replacements in Dallas run $180 – $450 per sash depending on glass package and size, and the work usually takes under an hour per window.
Seal Failure and Hail Damage
Dallas gets hit with a major hailstorm every few years, and the damage isn’t always a cracked pane. Hail can break the seal around the glass edge and cause slow fogging months later, which is why we inspect the full sash when we’re on site. If the storm cracked the glass but left the frame intact, an IGU replacement is the cheaper fix compared to redoing the whole window.
Glass Package Matching
Not all replacement glass is the same. For a west-facing Dallas bedroom with no shade, we’ll often recommend low-e glass (a thin coating that reflects heat back out in summer and back in during winter) with a higher solar heat gain coefficient so your AC doesn’t run nonstop in August. We match the replacement IGU to the existing window’s tint and grid pattern so one new pane doesn’t look out of place against the others.
Window Pane Replacement in Dallas
Window pane replacement in Dallas typically costs $120 – $380 for a single pane, depending on whether it’s a standard annealed pane or impact-rated glass, and whether we’re pulling the sash in a wood frame or an aluminum frame. A cracked pane is a security risk and a water intrusion point, especially on the north and east walls that catch Dallas’s spring storm lines. We replace the pane, reset the glazing, and check the weather seal around the entire sash while we’re there.
Single Pane in an Original Frame
Many 1970s and 1980s Dallas brick veneer homes still have their original single-pane aluminum windows, and a broken pane is common after hail or a stray baseball from the neighbor’s kid. We can replace the pane as a stopgap, but if the frame weep holes are corroded shut or the jamb is pitted from hard-water sprinkler spray, a pane swap won’t fix the real problem and water will keep driving into the wall.
Impact-Rated Replacement Glass
When we replace a pane on a Dallas home that’s been through a hail claim, we’ll often recommend upgrading to impact-rated glass from PGT or CGI. It costs more up front, but it holds together under impact instead of shattering into the living room, and it often qualifies for a homeowners insurance discount in Texas hail zones. We’ll quote both options in writing so you can decide with real numbers.
Trusted Brands We Service in Dallas
We stock and install windows from eight manufacturer lines so we can match the right product to the job instead of forcing every Dallas home into one brand. Window Replacement crews at Westlight install PGT and CGI impact-rated products for hail-prone areas, ECO Window Systems and ES Windows for energy efficiency, Mr-Glass for budget-conscious replacements, and Therma-Tru for entry doors that match the new windows. Because our Dallas-Fort Worth office keeps local part inventory on hand, we can order a replacement sash or IGU quickly when a specific glass package is needed. We don’t service brands outside these eight lines, and we’ll tell you that up front rather than promise something we can’t deliver.
Common Window Replacement Problems We See in Dallas Homes
- Corroded weep holes on original aluminum frames. In Dallas subdivisions built from the 1970s through the 1990s, hard-water sprinkler spray slowly seals the weep holes with mineral crust. Water that should drain out instead pools in the frame track and rots the jamb from the inside – a pocket insert won’t fix it, the frame has to come out.
- Undersized rough openings on brick veneer ranches. When we pull an old aluminum frame out of a 1970s Dallas brick veneer wall, the surrounding brick ledge is often unbolted and framed with 2x3s. A modern window with a Miami-Dade rating needs a sturdier rough opening, which means reframing and adding steel straps before the permit inspection passes.
- Failed seals from heat and UV cycling. Dallas summers push attic and wall temperatures well past 120 degrees, and that thermal cycling breaks IGU seals over time. If you see fog between the panes that you can’t wipe off, the seal is gone and the glass unit needs replacement.
- Wiring run along the rough sill. Original electrical wiring in older Dallas homes often runs right along the window’s rough sill. During a full frame replacement, that wiring gets exposed, and if it’s damaged or out of code, the inspector will require an upgrade before the window can be sealed in.
Pricing for Window Replacement in Dallas, TX
Here are straight numbers for the Dallas market. A pocket insert replacement typically runs $650 – $1,200 per opening. A full frame replacement runs $1,400 – $2,400 per opening, more if we’re reframing a corroded rough opening or adding impact-rated glass. Window glass repair (IGU swap) runs $180 – $450 per sash. Window pane replacement runs $120 – $380 per pane. These are installed prices, and your written quote includes labor, materials, and permit coordination. What changes the number: full frame versus insert, glass package, whether the rough opening needs reframing, and whether the permit inspection triggers a wiring upgrade. You’ll see every line item in writing before any work starts – that’s the Kingswell Guarantee. Call (361) 441-0865 for a free estimate, and you’ll get a written price, not a verbal ballpark.
We Also Serve Cities Near Dallas
Our crews run Window Replacement in Dallas and the surrounding metro every week. We cover Irving, Duncanville, Mesquite, and Hutchins with the same written pricing and the same Kingswell Guarantee. If you’re in one of those cities and you’ve been holding off because the first contractor didn’t show, call us. We show up when we said we would.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Replacement in Dallas
Because the original aluminum window frames in those neighborhoods have weep holes that corrode shut from decades of hard-water sprinkler spray, and once the weep holes are sealed, water has been driving into the wall cavity behind the frame – not just into the track where you can see it. A pocket insert slips into the old frame and hides the problem for a few years, but it doesn’t fix the water intrusion or the pitted, swelling jamb wood. Full frame replacement is the only repair that stops the leak at the source. Call (361) 441-0865 for a free inspection and we’ll show you exactly what’s inside your rough opening.
We write an allowance into your contract before the first wall is opened, so the possibility of a code-triggered wiring upgrade is priced and disclosed up front, not sprung on you after the drywall is off. If the inspector requires work outside the allowance, we document what we found, write a change order, and get your written approval before we touch the wiring or framing. You never pay for a surprise we didn’t put in writing first. Call (361) 441-0865 and we’ll walk you through how the allowance works on your specific Dallas home.
For a west-facing Dallas wall with no tree cover, we recommend low-e glass with a low solar heat gain coefficient (SHGC), which means the glass blocks more of the late-afternoon solar heat that turns that room into an oven from July through September. The west light is the late-afternoon sun that pours through a good window – bright, warm, and worth doing right – but in a Dallas August, you want the heat reflected out, not beaming in. We’ll spec the exact SHGC for your wall orientation and quote it in writing. Call (361) 441-0865 for a free estimate.
A hail claim usually means your insurer sends an adjuster to document every damaged window, and that documentation drives what they’ll pay for. We photograph and document the exact failure mode on each window – cracked pane, failed seal, broken frame – and coordinate directly with your adjuster so the claim covers the right scope of work, not just a cheap patch. If the adjuster misses something we caught, we’ll show them the photo evidence. Call (361) 441-0865 before you sign off on the claim and we’ll review the scope with you.
Yes, we match the original brick mold profile by sourcing or milling the casing to the existing trim dimensions, then painting or staining to match the rest of the house. The goal is a window that looks like it was always there, not a modern insert jammed into a 1980s opening with a mismatched trim ring. We’ll show you a sample section before the full order goes in, and the written quote includes the matching labor so there’s no upcharge at the door. Call (361) 441-0865 for a free estimate on your Dallas home.
Open the Wall and See What’s Actually There
Dallas’s 1970s – 1990s brick veneer tract homes typically have aluminum single-pane windows with weep holes that corrode shut from hard-water sprinkler spray. When you pull one of those original windows, what you find inside the rough opening is rarely clean: pitted aluminum, undersized 2×3 framing, original wiring running along the sill, and brick ledges that were never bolted for a modern window. That’s why we do a full inspection of the rough opening before we order glass, and why every surprise gets priced and approved in writing before we touch the framing. This is the single biggest reason a window replacement quote moves in Dallas, and we handle it the same way on every job: inspection first, allowance written into the contract, change order approved before the work proceeds.
On a replacement in Lake Highlands, our crew opened the wall around an original aluminum double-hung and found the weep holes sealed with mineral crust and the jamb framing undersized at 2×3. We documented the corroded frame and wrote a change order for full frame replacement with a PGT impact-rated casement before any new glass was ordered, so the homeowner approved the exact upcharge in writing before we touched the rough opening. That’s how it should work every time – no door-step surprises, no revised invoices.
If your Dallas home still has its original aluminum windows, you’re probably buying time until the next hailstorm or the next hard freeze, and every year the frame corrodes a little more behind the wall. Our crews know what they’ll find because we’ve opened hundreds of these walls across Dallas, from Casa View to Preston Hollow. Call (361) 441-0865 and we’ll give you a written price for the full scope – frame, glass, flashing, and any electrical upgrade the permit triggers – before you spend another dollar on a pocket insert that won’t stop the leak.
Written by Owen Satterfield, Owner at Westlight Windows Dallas, providing window replacement across Dallas and the surrounding metro since 2009.
Six Reasons Homeowners Choose Westlight Windows Dallas
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.